MarSensing

Underwater acoustics from Faro, Portugal, since 2007

Underwater sound, from the sensor to the report

We build hydrophones and acoustic systems, deploy them at sea, and turn what they record into noise maps and assessments for regulators, industry and research.

SR-1 ETH hydrophone recorder, the whole unit from end cap to connectors
Hydrophones we build
Modelled shipping noise off mainland Portugal, louder areas in yellow around individual ships
Shipping noise map, mainland Portugal
Research catamaran lowering an acoustic platform at the MARREAL observatory off Sagres
Deploying at the MARREAL observatory, Sagres
The MARREAL observatory frame on the seabed off Sagres
MARREAL station on the seabed

Equipment

Instruments we design, build and take to sea

From a single recorder on a mooring to multichannel systems streaming to shore.

SR-1 ETH recorders supplied as a kit

SR-1 ETH hydrophone

Our autonomous recorder. It records on its own for long deployments and streams live when connected, delivered as a complete kit ready to deploy.

Vector sensor rigged in a mooring frame

Arrays and vector sensors

Multichannel hydrophone arrays and vector sensors that tell not only how loud the sea is, but where the sound comes from.

Lubell Labs underwater transducer

Underwater sound sources

Sound sources for propagation surveys, playback experiments and sea trials, from 50 Hz to over 20 kHz. See the sources.

Noise monitoring

Measuring and mapping underwater noise

We plan the campaign, deploy and recover the recorders, and deliver the analysis, combining measurements with shipping noise models.

  • MSFD Descriptor 11. Continuous underwater noise monitoring for mainland Portugal, for the Portuguese Government.
  • Shipping noise modelling. Noise maps built from vessel traffic and checked against real recordings.
  • Impact studies. Baseline and construction monitoring for ports, energy, dredging and aquaculture.
  • Data analysis. Long recordings, ours or yours, turned into clear levels and statistics.
Vessel traffic off mainland Portugal

Sound sources · AQUASOM® and Lubell Labs

Underwater sound sources for science at sea

The sources we use in our own propagation surveys and sea trials, from 50 Hz to over 20 kHz. We help you choose the source, the amplifier and the rigging.

Lubell LL916C underwater speaker in its steel cage

General purpose source

LL916C

Sound propagation, acoustic inversion and underwater communications, at sea, in lakes and in test tanks.

Band
0.2–21 kHz
Level
180 dB @ 1 kHz
Depth
to 15 m
Lubell LL964 underwater speaker in its protective cage

Long cable runs

LL964C

High impedance version of the LL916, for sources far from the amplifier: runs over cables up to 1.5 km with little loss. For fixed installations and acoustic barriers.

Band
0.2–23 kHz
Level
180 dB @ 1 kHz
Depth
1.8–15 m
Lubell LL9162 high power transducer in its shock mount cage

High power, full range

LL9162

More level across the whole band, and usable as a hydrophone too. Can be mounted permanently. Needs an isolated amplifier of up to 300 W.

Band
0.2–20 kHz
Level
190 dB @ 10 kHz
Depth
1–18 m
Lubell VC2C low frequency dual piston source in stainless steel

Low frequency

VC2C

Omnidirectional moving coil source down to 50 Hz, the band where shipping noise lives. Pressurised on deck to match its working depth.

Band
50 Hz–1.5 kHz
Level
174 dB @ 115 Hz
Depth
3–15 m
Lubell LL1424HP transducer in its stainless steel cage, next to the AC1424HP bridging box

Highest level

LL1424HP

Piezoelectric source for amplifiers up to 2500 W. Long range propagation, marine biology and acoustic deterrence, with a tow frame for towed transmissions.

Band
0.2–9 kHz
Level
197 dB @ 600 Hz
Depth
1.8–12 m
AQUASOM Diver kit: a caged LL916C underwater speaker, a mixer amplifier and a push to talk microphone

Field kit · AQUASOM®

AQUASOM Diver

A caged LL916C with amplifier and microphone, ready to play test signals from a boat, a pier or the edge of a tank, and to recall divers.

Power
12 V
Amplifier
60 W
Inputs
2 mic, 1 aux

Levels in dB re 1 µPa at 1 m. LL964, LL9162, VC2C and LL1424HP are sold only to scientists, ocean engineers, government or the military. Official Lubell Labs dealer for Portugal, Spain, Germany, Austria and Gibraltar.

Product sheets for these sources, and underwater speakers for swimming pools and aquatic sports, are on AQUASOM®, our underwater sound brand.

Full range on aquasom.com ↗

About us

A small team of scientists and engineers

MarSensing was founded in 2007 as a spin-off of the Signal Processing Laboratory (SiPLAB) at the University of the Algarve. We make our own hydrophones and electronics, go to sea with them, and publish our methods. Our office is on the Gambelas campus in Faro.

Since 2007

Over 15 years of underwater acoustics in Portugal and across Europe.

Sensor to report

Instrument makers, sea team and data analysts in one team.

Trusted by

The Portuguese Government, the Portuguese Navy, universities and industry.

Tell us what you need to hear

An instrument, a monitoring programme, a noise study or data you already have: one of our scientists will reply.

Centro Empresarial Gambelas, Pavilhão B1, Campus de Gambelas, 8005-139 Faro, Portugal